- ページ 6

ストリング・マシン Gamma Progression ElsのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Progression Els 19 ページ。
Gamma Progression Els にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)

ページを印刷する

1. Maintenance & Adjustments

CONTROL PANEL FUNCTIONS

AND FEATURES

Tension Index Buttons - Changes

tension setting in +/- 1.0 or +/- 0.1 Lb or

Kg increments. Holding the button down

will scroll the tension setting values up

or down. Tension settings entered with

the tension index buttons are placed

into temporary memory setting "0".

Clear Button - Clears display to enter a

new tension or to reset String Length

Meter measurement

Test Button & Racquet Strung - Press

once for approximate number of

racquets strung. Press again to return.

Press and hold for 5 seconds and the

machine does an internal diagnostic

check, such as the one performed at

start-up.

Lbs/Kgs Button - Changes tension

display from Lbs to Kgs. Each press of

the button toggles back and forth

between Lbs and Kgs.

Pre-Stretch Function - Pulls string

10% or 20% over the tension setting (up

to 90 lbs / 40.8 kgs), releases the string,

and repulls to the tension setting. Each

press of the button toggles between

10%, 20% or no pre-stretch.

Single Digit (1-9)

Memory LED Display

Memory Button - Indexes from 9 preset

tension settings that can be stored in

memory. Settings are retained even if

machine is turned off. Each press of the

button indexes to the next memory setting.

Memory settings 1-9 must be entered using

the keypad followed by pressing the "ENT"

button.

Enter Button - Saves displayed tension for

Memory setting - when tension is entered

using the keypad display flashes until this

button is pressed to save the setting. Also

Clears display for String Length Meter

measurements

Knot Function - Increases pulling tension

by 10% over the setting value (max 90 lbs /

40.8 kgs) for one pull. During the pull the

LED stays lit to indicate the Knot function is

enabled.

Speed Button - Changes pulling speed

of winder from Fast (default) to Medium

to Slow. Slow speed is recommended

for low stretch strings, such as Kevlar.

Each press of the button toggles

between Fast, Medium and Slow

speeds.

String Length Meter Button - feature is

currently not available.

Three Digit (XX.X)

Tension Setting

Display or String

Length LED Display