Gamma Progression Els Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression Els. Gamma Progression Els 19 pages.
Also for Gamma Progression Els: Owner's Manual (20 pages), Owner's Manual (20 pages)
Print Page
CONTROL PANEL FUNCTIONS
AND FEATURES
Tension Index Buttons - Changes
tension setting in +/- 1.0 or +/- 0.1 Lb or
Kg increments. Holding the button down
will scroll the tension setting values up
or down. Tension settings entered with
the tension index buttons are placed
into temporary memory setting "0".
Clear Button - Clears display to enter a
new tension or to reset String Length
Meter measurement
Test Button & Racquet Strung - Press
once for approximate number of
racquets strung. Press again to return.
Press and hold for 5 seconds and the
machine does an internal diagnostic
check, such as the one performed at
start-up.
Lbs/Kgs Button - Changes tension
display from Lbs to Kgs. Each press of
the button toggles back and forth
between Lbs and Kgs.
Pre-Stretch Function - Pulls string
10% or 20% over the tension setting (up
to 90 lbs / 40.8 kgs), releases the string,
and repulls to the tension setting. Each
press of the button toggles between
10%, 20% or no pre-stretch.
Single Digit (1-9)
Memory LED Display
Memory Button - Indexes from 9 preset
tension settings that can be stored in
memory. Settings are retained even if
machine is turned off. Each press of the
button indexes to the next memory setting.
Memory settings 1-9 must be entered using
the keypad followed by pressing the "ENT"
button.
Enter Button - Saves displayed tension for
Memory setting - when tension is entered
using the keypad display flashes until this
button is pressed to save the setting. Also
Clears display for String Length Meter
measurements
Knot Function - Increases pulling tension
by 10% over the setting value (max 90 lbs /
40.8 kgs) for one pull. During the pull the
LED stays lit to indicate the Knot function is
enabled.
Speed Button - Changes pulling speed
of winder from Fast (default) to Medium
to Slow. Slow speed is recommended
for low stretch strings, such as Kevlar.
Each press of the button toggles
between Fast, Medium and Slow
speeds.
String Length Meter Button - feature is
currently not available.
5
Three Digit (XX.X)
Tension Setting
Display or String
Length LED Display