Gamma Progression Els Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression Els. Gamma Progression Els 19 pages.
Also for Gamma Progression Els: Owner's Manual (20 pages), Owner's Manual (20 pages)

Print Page

1. Maintenance & Adjustments

POWER CONNECTION & CONTROLS

Instructions for Power Connection and Controls

CAUTION ! Before connecting to the power supply, check the voltage source that the

machine is being connected to. The acceptable range of input voltages for this

machine is between 100 V and 240 V @ 50 to 60 Hz. If you have any questions

regarding the input voltage supply for your area, please ask your electric utility

company.

To install the power cord, insert the female end of the power cord into the AC Adapter and

then insert the female end of the cord from the AC Adapter into the A/C Power Cord

Socket "C" located on the back panel of the tensioner. Plug the male end of the power

cord into a grounded power outlet. When using extension cords, use grounded heavy duty

extension cords rated for 15 AMP service.

To connect the foot pedal switch, insert the male pin at the end of the foot pedal switch

cord into the Foot Pedal Switch Receptacle "B" located on the back panel of the tensioner.

Switch on the machine by pressing the Lighted On-Off Power Switch on the back panel. At

start-up, the LED will display a countdown from "9.0" to "0.0" while the machine performs a

self diagnostics check at start-up.

WARNING!

ADULTS OR UNDER ADULT SUPERVISION ONLY.

NEVER OPEN UNIT WITH POWER CONNECTED

FOR INDOOR USE ONLY. TO BE USED BY

Front Panel Features

A - String Gripper

B - Tension Switch

C - L.E.D. Tension Display

Back Panel Features

A -

Lighted Power Switch

B -

Foot Pedal Switch Receptacle

C -

A/C Power Cord Socket

D -

String Length Meter (currently not

available)