ページを印刷する
- 1. Table of Contents
- 2. Gamma X-Es Gamma X-Es Gamma X-Es Gamma X-Es
- 3. Features
- 4. Assembly Instructions
- 5. Power Connection & Controls
- 6. Mounting the Frame
- 7. Stringing the Frame
- 8. Additional Features
- 9. Pathfinder Awl
- 10. Maintenance and Adjustments
- 11. Troubleshooting Tips
- 12. Parts List
- 13. Parts Drawing
ASSEMBLY INSTRUCTIONS
Support Post Installation (cont'd)
Place the support post onto the central slot
of the turntable. With your fingers placed
through the large hole in the underside of the
turntable, press the mounting plate against
the inside top surface of the turntable while
aligning the hole in the support post with the
hole in the mounting plate and fix them with
the mounting bolt. Repeat procedure on to
attach the support post on the opposite side
of the turntable.
String Clamp Installation
The post of the string clamp and tube of the
string clamp base are treated with grease to
provide protection against corrosion during
shipping. Remove any excessive grease
with a clean cloth prior to use. The post and
tube may also be cleaned with isopropyl
alcohol. After this type of thorough cleaning,
the post and tube should be treated with a
light coating of machine oil to protect the
surfaces against corrosion and to ensure
smooth operation.
4