Gamma X-ES Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma X-ES. Gamma X-ES 19 stron.

ASSEMBLY INSTRUCTIONS

Support Post Installation (cont'd)

Place the support post onto the central slot

of the turntable. With your fingers placed

through the large hole in the underside of the

turntable, press the mounting plate against

the inside top surface of the turntable while

aligning the hole in the support post with the

hole in the mounting plate and fix them with

the mounting bolt. Repeat procedure on to

attach the support post on the opposite side

of the turntable.

String Clamp Installation

The post of the string clamp and tube of the

string clamp base are treated with grease to

provide protection against corrosion during

shipping. Remove any excessive grease

with a clean cloth prior to use. The post and

tube may also be cleaned with isopropyl

alcohol. After this type of thorough cleaning,

the post and tube should be treated with a

light coating of machine oil to protect the

surfaces against corrosion and to ensure

smooth operation.