アクセサリー Green Brook KingShield Orion RangeのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Green Brook KingShield Orion Range 2 ページ。 Infra-red motion sensor - wall switch

ページを印刷する

•

Please read these instructions carefully before installation and keep safe for future reference.

IMPORTANT

This product should be installed by a competent person and in accordance with the current

IET Wiring Regulations and Building Regulations.

If in doubt,consult a qualified electrician.

•

Always turn off the mains supply before commencing work.

As the detector responds to changes in temperature, avoid the following situations:-

•

Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors

etc.

•

Avoid mounting the detector near heat sources, such as heating vents, air conditioning

units, lights etc.

•

Avoid pointing the detector towards objects that may move in the wind, such as curtains,

tall plants etc.

Switch the mains supply OFF first to prevent electric shock.

1. Unclip both face plates using a small

flat-blade screwdriver, refer to Dia:1.

Dia:1

'Orion Range'

Infra-red Motion Sensor - Wall Switch

Model: OD100

Important Safety Instructions

FIELD OF DETECTION

INSTALLATION

Model: OD100 -

Function Switch:

'ON'

= Permanently ON

'OFF'

= Permanently OFF

'PIR"

= PIR Control

2. Connect the Live in wire to the 'L'

terminal and Load out wire to the 'A'

terminal, refer to Dia:2.

Dia:2