- ページ 12

試験装置 Major tech MT575のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech MT575 16 ページ。 10kv high voltage insulation tester

4. Press the SEL button to select year, month, day, hour,

5. Press the ▲ "up button" or the ▼ "down button" till the

6. After all adjustments are complete, press the ENTER/SAVE

Note: if Date/Time unit (year, month, day, hour or minute)

7. Press the ESC/

7.1.4.2. Function 2 – Measurement time setting

1. Turn on the insulation tester by rotating the function rotary

2. Press the SEL function to enter the minor function selection.

3. Press the ▲ "up button" or the ▼ "down button to find the

4. Press the ENTER/SAVE button, LCD displays the picture

5. Press the ▲ "up button" or the ▼ "down button" to set the

6. After setting is complete, press the ENTER/ SAVE button to

Note: if Test Timer unit needs not to be adjusted, press the

ESC/backlight button and return back to the minor function

selection.

minute for adjustment, LCD displays the following picture

respectively;

correct value is reached.

button to confirm and save the data measured.

needs not to be adjusted, press the ESC/

return back to the minor function selection.

page.

(Test Timer)

switch to any position(except OFF).

measurement time setting; LCD displays the following

picture respectively;

shown in below:

test time (from 1-30 minutes)

confirm & save the data measured.

button again to return back to the main

to skip it and