- ページ 4

おもちゃ 2kiters Arno Haft'sのPDF マニュアルをオンラインで閲覧またはダウンロードできます。2kiters Arno Haft's 15 ページ。 Bird kite

the inner edge. Straight stitch the outer edge. It will be covered with the edge binding and the top

edge will be sewn as you edge bind. It is helpful later if you position a piece of tape with a mark

on it, pointing to the center of H.

Reinforcements A, B, I, and H

Reinforcements Use matching thread.

Sew the reinforcements onto the back of

the kite skin. Use a Zig zag stitch. Look

at the samples, pictures, and Diagram1

for correct placement and the side to

sew. Reinforcements C and E will be

sewn in place after the wings and body

are sewn together.

Part 1. (of 4 Parts) Wings: Sew A, B,

and I onto the wings. Make a right and a

left wing. Sew H on the wings. The

center of H is 10.5 inches / 26.6cm from

edges is not necessary.

Reinforcements J and K

Note: Sewing all