2kiters Arno Haft's 매뉴얼 - 페이지 4

{카테고리_이름} 2kiters Arno Haft's에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2kiters Arno Haft's 15 페이지. Bird kite

the inner edge. Straight stitch the outer edge. It will be covered with the edge binding and the top

edge will be sewn as you edge bind. It is helpful later if you position a piece of tape with a mark

on it, pointing to the center of H.

Reinforcements A, B, I, and H

Reinforcements Use matching thread.

Sew the reinforcements onto the back of

the kite skin. Use a Zig zag stitch. Look

at the samples, pictures, and Diagram1

for correct placement and the side to

sew. Reinforcements C and E will be

sewn in place after the wings and body

are sewn together.

Part 1. (of 4 Parts) Wings: Sew A, B,

and I onto the wings. Make a right and a

left wing. Sew H on the wings. The

center of H is 10.5 inches / 26.6cm from

edges is not necessary.

Reinforcements J and K

Note: Sewing all