2kiters Arno Haft's 매뉴얼 - 페이지 5

{카테고리_이름} 2kiters Arno Haft's에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2kiters Arno Haft's 15 페이지. Bird kite

Part 2. Body: Position and sew on G, F, J, K. These use the same methods as for the wing.

Part 3. Reinforcement D: This is the 3" x

5/8" or 7.75 x 15 cm piece of Dacron.

Center it on the back of the body where

the spine and spreader cross. Don't sew it.

Tape it in place. Place the dihedral strap

(1/4" x 3.5" or .6 x 9 cm) so that it is

centered horizontally on the taped D

piece. The ends are even top and bottom,

forming a loop in the center. Sew with a

straight stitch across the ends and where

the loop starts. Zig zag on the strap. See

drawing. Later, when you are putting the

spine sleeve in place, you will catch the

outer edges of piece D. (Note: The

dihedral will slide into the strap but will

not stay in place.) Diagram 8 on page 10

shows the strap's location.

Reinforcement D