- ページ 4

インバーター JALpower NS SERIESのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。JALpower NS SERIES 14 ページ。 Solar inverter

ページを印刷する

3 4

3.2.2 Package

POWER

RUN

FAULT

Wall-mounted

Inverter×1

Bracket×1

Terminal×1*

Screw×4

*There is 1 pair of DC connectors in NS Series 1-3KW. and 2 pairs of DC connectors in NS Series 3.6-5KW and D-NS Series 3-5KW；

*AC connector is applied to both NS Series 3.6-5KW and D-NS Series 3-5KW;

*AC terminal is applied to NS Series 1-3KW;

*There are 2 terminals in Australian model。

3.3 Inverter Installation

3.3.1 Selecting the installation location

The following must be considered when selecting the best location for an inverter:

●The mount and installation method must be appropriate for the inverter's weight and dimensions.

●The location must be well ventilated and sheltered from direct sunlight.

●The inverter must be installed vertical or with a backward tilt less than 15°. No sideways tilt is allowed. The connection

area must point downwards. Refer to Figure 3.3.1-1.

1. PV input terminals

2. DC Switch (Optional)

3. RS-485 port or USB port

4. Wi-Fi antenna port (Optional)

Anti Reverse Current Module

(Optional)

6. AC output terminal

7. LCD display

8. Indicator lights

POWER

RUN

9. Button

FAULT

Figure 3.2.1-2

AC PlugX1*

AC Terminal×4*

DC PlugX2pair*

Quick

User

Installation

manual

Guide

Wi-Fi Connection

User Manual×1

Quick Installation

Expansion Bolts×5

(Wi-Fi model only)

Guide×1

To allow dissipation of heat, and for convenience of dismantling, clearances around the inverter must be at least:

200mm

Wi-Fi

Connection

Guide

Antenna×1

Guide×1

3.3.2 Mounting Procedure

(1) Use the wall-mounted bracket as a template and drill holes in the wall, 10 mm in diameter and 80 mm deep. NS 1kW~3kW

referred to Figure 3.3.2-1, NS 3.6kW~5kW & D-NS 3kW~5kW referred to Figure 3.3.2-2.

(2) Fix the wall mounting bracket on the wall using the expansion bolts in the accessories bag.

(3) Hold the inverter by the side groove as Figure 3.3.2-3.

(4) Install the inverter on the wall-mounted bracket. NS 1kW~3kW referred to Figure 3.3.2-4, 3.3.2-5. NS 3.6kW~5kW & D-NS

3kW~5kW referred to Figure 3.3.2-6, Figure 3.3.2-7.

125mm

Max

15°

Figure 3.3.1-1

300mm

200mm

300mm

POWER

RUN

FAULT

500mm

Figure 3.3.1-2

250mm

125mm

250mm

260mm

265mm

Figure 3.3.2-1

Figure 3.3.2-2

Upward ----------300mm

Downward--------500mm

Front-------------300mm

Both sides---------200mm

Figure 3.3.2-3