- ページ 4

オーブン IKEA NUTIDのPDF 設置および使用説明書をオンラインで閲覧またはダウンロードできます。IKEA NUTID 46 ページ。 French door refrigerator
IKEA NUTID にも：インストレーション・マニュアル (16 ページ), インストレーション・マニュアル (12 ページ), 組立説明書 (12 ページ)

ページを印刷する

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: This refrigerator is designed for indoor, household

use only.

This appliance is intended to be used in household and similar

applications such as:

Staff kitchen areas in shops, offices and other working

■

environments.

Farm houses and by clients in hotels, motels and other

■

residential type environments.

Bed and breakfast type environments.

■

Catering and similar non-retail applications.

■

To ensure proper ventilation for your refrigerator, allow for 1/2"

(1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator

has an ice maker, allow extra space at the back for the water

line connections. When installing your refrigerator next to a

fixed wall, leave 2¹⁄

" (6.3 cm) minimum on the hinge side (some

models require more) to allow for the door to swing open.

NOTE: This refrigerator is intended for use in a location where

the temperature ranges from a minimum of 55°F (13°C) to a

maximum of 110°F (43°C). The preferred room temperature

range for optimum performance, which reduces electricity

usage and provides superior cooling, is between 60°F (15°C)

and 90°F (32°C). It is recommended that you do not install the

refrigerator near a heat source, such as an oven or radiator.

" (1.25 cm)

¹⁄₂

" (6.3 cm)

¹⁄₂

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it

is important to mwake sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 volt, 60 Hz, AC only 15 or 20 A fused, grounded electrical

supply is required. It is recommended that a separate circuit

serving only your refrigerator be provided. Use an outlet that

cannot be turned off by a switch. Do not use an extension cord.

If the supply cord is damaged it must be replaced by the

manufacturer or its service agent or a similarly qualified person.

Do not use a cord that shows cracks or abrasion damage along

its length, or at either the plug or connector end.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the refrigerator to OFF. Depending

on your model, turn the freezer control to the word OFF, or

press the Freezer down arrow touch pad until a dash (–)

appears in both the Freezer and Refrigerator displays as shown.

Disconnect the refrigerator from the electrical source. When you

are finished, reconnect the refrigerator to the electrical source

and reset the temperature controls to the desired setting. See

"Using the Controls."

Water Supply Requirements

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

TOOLS NEEDED:

Flat-blade screwdriver

■

7/16"and 1/2" Open-end or

■

two adjustable wrenches

IMPORTANT:

Connect to a potable water supply only.

■

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

1/4" Nut driver

■

1/4" Drill bit

■

Cordless drill

■