- ページ 10
オーブン IKEA NUTID OV 9のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。IKEA NUTID OV 9 32 ページ。 Built-in oven
IKEA NUTID OV 9 にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (26 ページ), ユーザーマニュアル (12 ページ), 使用方法 (4 ページ), 商品説明シート (4 ページ), 取扱説明書 (20 ページ), マニュアル (20 ページ)
ページを印刷する
- 1. Table of Contents
- 2. Safety Information
- 3. Product Description
- 4. Control Panel
- 5. Daily Use
- 6. Cooking Tables
- 7. Cleaning and Maintenance
- 7. Refit Door
- 7. Replace Rear Lamp
- 8. What to Do if
- 9. Technical Data
- 10. Installation
- 11. Electrical Connection
- 12. Environmental Concerns
- 13. Electrical Connection for Great Britain and Ireland Only
- 14. Ikea Guarante
ENGLISH
7. At the end of the set time, the oven
automatically switches off,
appears on the display and a buzzer
sounds.
"Pyrolysis" function
1. Turn the knob A to the Pyrolysis
automatic cleaning function and for
2 seconds the display will show CLn
(cleaning); the selector will automatically
set a minimum duration of 1:30.
2. To modify the automatic cleaning cycle
duration, use the "+" "-" buttons. The
maximum programme duration is 3
hours.
To set the end of the pyrolysis cycle,
proceed as follows:
1. Press the "set" button to set the end of
pyrolysis duration. The indicator q next
to the symbol
2. Set the end of the pyrolysis cycle with the
"+" "-" buttons.
3. Press the "ok" button to confirm the
end of pyrolysis duration. The oven will
switch on automatically at the end of the
pyrolysis cycle minus the cycle duration
(previously set). The indicators q above
the symbols
4. To increase the pyrolysis duration, press
the "set" button and set the new cycle
duration with the "+" button.
5. Confirm with the "ok" button. At the end
of the set time, a buzzer sounds and the
display will show
6. Press "ok" to stop the buzzer.
7. Turn the knob A to "0": the time will
reappear on the display.
Timer
The timer can only be used when the oven is
not in use and allows a maximum time of 6
hours to be set.
To set the timer:
1. Leave knob A turned to "0". The display
shows the time of the day.
2. Press the "set" button. the indicator q
lights up next to the symbol
lights up.
light up in succession.
.
. Use the
"-" or "+" buttons to set the required
time.
3. Press the "ok" button to confirm the
selection. At the end of the set time: A
buzzer sounds and
display.
Press the "ok" button: the buzzer stops.
The time of day reappears on the
display.
Child Safety (Lock)
1. After turning the knob A to "0", press
the "-" and "+" buttons together for 3
seconds.
Note:
Activation of the LOCK function is indicated
by an acoustic signal, whereas the symbol
appears on the display.
Once set, the display will continue to
indicate the time.
2. The oven functions cannot be used after
Safety Lock activation.
3. To deactivate the lock, repeat the
sequence described in point 1.
10
flashes on the