- ページ 13

農機具 Green Frog Designs Chicken Run 4x2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Green Frog Designs Chicken Run 4x2 17 ページ。

Place the partially completed Upper Hinge Assembly over

the top corner of the Door Frame (opposite corner from

the lock assembly), and add the second Door Hinge Side,

securing it with Pi Clips. This picture shows the top of the

door.

Hang the door using Clevis Pins and R-Clips on the two

inner holes on the Door Hinge Holders. The Lower Hinge

Holder will rest on the bottom bars, and support the

door.

Printed on recycled paper

Repeat steps 6 and 7 for the Lower Hinge Assembly.

Note the positions of the lugs on both hinge assemblies,

ready for hanging the door. The door is now complete,

except for the addition of mesh, which is best left until

after the frame is fully assembled and the door is hung.

The Door will need holding in place until it is attached

both top and bottom. The Upper Hinge Holder will need

to be slid upwards and held in position while the Clevis Pin

and R-Clip as fitted. Once attached, the door can be

closed and secured by the Door Catch.

Page 13 of 17