- ページ 8

ヒーター Decofire DF102043のPDF 組立・安全・操作説明書をオンラインで閲覧またはダウンロードできます。Decofire DF102043 17 ページ。 Rapid reduction area heater
Decofire DF102043 にも：組立・安全・操作説明書 (17 ページ)

ページを印刷する

Step 1.

Flip the cylinder housing (D) upside down and attach

the wheel assembly (J) to the base of the cylinder

housing (D) using 2 M8 x 16 screws (CC).

Step 3.

Attach the cylinder housing supporter (G) into the

cylinder housing (D) using 1 M8 x 16 screw (CC) and

2 M5 x 12 screws (AA). Do not fully tighten to allow

room for adjustment later in the assembly process.

Page 8

Step 2.

Attach the anchoring arms (FF) onto the base of the

cylinder housing (D) using 6 M6 x 12 screws (BB) and 6

M6 nuts (DD).

Step 4.

Remove the preassembled M5 screws from the upper

supporters (I), then slide the 3 upper supporters into the

slots at the top of the burner (C). Once fully inserted secure

the upper supporters (I) into the burner (C) by replacing

the M5 screws that were removed at the beginning of this

step.

Note: Be sure that the hooks on the upper supporters (I)

are facing upwards.