Decofire DF102043 Montage-, veiligheids- en bedieningsinstructies - Pagina 8
Blader online of download pdf Montage-, veiligheids- en bedieningsinstructies voor {categorie_naam} Decofire DF102043. Decofire DF102043 17 pagina's. Rapid reduction area heater
Ook voor Decofire DF102043: Montage-, veiligheids- en bedieningsinstructies (17 pagina's)
Pagina afdrukken
J
D
Step 1.
Flip the cylinder housing (D) upside down and attach
the wheel assembly (J) to the base of the cylinder
housing (D) using 2 M8 x 16 screws (CC).
D
CC
Step 3.
Attach the cylinder housing supporter (G) into the
cylinder housing (D) using 1 M8 x 16 screw (CC) and
2 M5 x 12 screws (AA). Do not fully tighten to allow
room for adjustment later in the assembly process.
Page 8
CC
G
AA
DD
Step 2.
Attach the anchoring arms (FF) onto the base of the
cylinder housing (D) using 6 M6 x 12 screws (BB) and 6
M6 nuts (DD).
I
C
Step 4.
Remove the preassembled M5 screws from the upper
supporters (I), then slide the 3 upper supporters into the
slots at the top of the burner (C). Once fully inserted secure
the upper supporters (I) into the burner (C) by replacing
the M5 screws that were removed at the beginning of this
step.
Note: Be sure that the hooks on the upper supporters (I)
are facing upwards.
BB
FF
D