- ページ 15

冷蔵庫 IKEA NUTIDのPDF 設置および使用説明書をオンラインで閲覧またはダウンロードできます。IKEA NUTID 46 ページ。 French door refrigerator
IKEA NUTID にも：インストレーション・マニュアル (16 ページ), インストレーション・マニュアル (12 ページ), 組立説明書 (12 ページ)

ページを印刷する

Water Filtration System

The water filter is located in the upper right-hand corner of the

refrigerator compartment.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

IMPORTANT: The disposable water filter should be replaced at

least every 6 months. If the water flow to the water dispenser or

ice maker decreases noticeably before 6 months have passed,

replace the water filter more often.

Replacing the Water Filter

To purchase a replacement water filter, model

UKF8001AXX-750 or UKF8001AXX-200, contact your dealer or

call 1-866-664-2449 U.S.A. or Canada.

IMPORTANT: Air trapped in the water system may cause water

and filter to eject. Always dispense water for at least 2 minutes

before removing the filter or blue bypass cap.

1. Turn filter counterclockwise to remove.

2. Remove sealing label from replacement filter and insert the

filter end into the filter head.

3. Turn the filter clockwise until it stops. Snap the filter cover

closed.

4. Flush the water system. See "Water Dispenser."

NOTE: The dispenser feature may be used without a water

filter installed. Your water will not be filtered. If this option is

chosen, replace the filter with the blue bypass cap.

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically.

However, clean both compartments about once a month to

avoid buildup of odors. Wipe up spills immediately.

IMPORTANT:

Because air circulates between both sections, any odors

■

formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To avoid

odor transfer and drying out of food, wrap or cover foods

tightly.

For stainless steel models, stainless steel is

■

corrosionresistant and not corrosion-proof. To help avoid

corrosion of your stainless steel, keep your surfaces clean

by using the following cleaning instructions.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, muriatic acid,

cleaning waxes, concentrated detergents, bleaches or

cleansers containing petroleum products on exterior surfaces

(doors and cabinet), plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or other

harsh cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

3. Clean the exterior surfaces.

Painted metal: Wash painted metal exteriors with a clean,

soft cloth or sponge and a mild detergent in warm water.

Rinse surfaces with clean, warm water and dry immediately

to avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean,

soft cloth or sponge and a mild detergent in warm water.

Rinse surfaces with clean, warm water and dry immediately

to avoid water spots.

NOTE: When cleaning stainless steel, always wipe with the

grain to avoid cross-grain scratching.

4. There is no need for routine condenser cleaning in

normalhome operating environments. If the environment is

particularly greasy or dusty, or there is significant pet traffic

in the home, the condenser should be cleaned every 2 to 3

months to ensure maximum efficiency.

If you need to clean the condenser:

Remove the base grille.

■

Use a vacuum cleaner with a soft brush to clean the

■

grille, the open areas behind the grille and the front

surface area of the condenser.

Replace the base grille when finished.

■

5. Plug in refrigerator or reconnect power.

Changing the Light Bulb

IMPORTANT:The light bulbs in both the refrigerator and

freezer compartments use LED bulbs, incandescent bulbs or a

combination of the two.If the lights do not illuminate when the

refrigerator and/or freezer door is opened, call for assistance or

service.See "Warranty" for phone numbers.

1. Unplug the refrigerator or disconnect power.

2. Remove the light shield (on some models).

Top of the refrigerator compartment - Slide the light

■

shield toward the back of the compartment to release it

from the light assembly.

3. Replace the burned-out bulb(s) with a bulb of the same size,

shape and wattage.

To replace a burned out LED bulb with a LED bulb, order

■

Part Number W10565137 (3.6 watts).

Note: Some LED replacement bulbs are not recommended

for wet/damp environments.The refrigerator and

freezer compartments are considered to be wet or

damp environments.If using a brand of LED other than

recommended LED bulb, before installation, read and follow

instructions on the LED packaging.

When replacing an incandescent bulb, use only

■

incandescent bulbs for household appliances with a

maximum of 40 watts. Replace bulb shield/shroud after

replacing incandescent bulb.

4. Replace the light shield.

5. Plug in refrigerator or reconnect power.