- ページ 12

車椅子 decon AdventusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。decon Adventus 18 ページ。 Folding wheelchair adaptor
decon Adventus にも：組み立て説明書 (8 ページ)

Adventus

User manual

To customize Adventus

1. Measure the height from ground up to underneath the front tube of the wheelchair´s

footrest. Now set the angle postion (D) and wheelposition (G) according to the table below.

INFO!

Using the settings in the table below normaly results in lifting the front castors of the

wheelchair 30-40mm from the ground.

INFO!

The settings in the table below can vary between different wheelchair models and

manufacturers. The table shows a wheelchair where the footrest sits in an angle of

6-7degrees in relation to the ground.

Height footrest

0-30

[mm]

Angle position (D)

[D0, D1]

Wheel position (G)

[G1, G2, G3, G4]

Mechanical settings

30-50

50-70

Sida 12/18

70-90

90-100

100-