- ページ 7

おもちゃ Bernard Burton Spirit of PittsのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。Bernard Burton Spirit of Pitts 11 ページ。

Step 13: Prepare the motor cowl

Prepare all the cowl concentric rings (CR1 – CR8) by gluing their sub-parts with CA

glue.

Glue the concentric rings together as showed on the plan with 30' epoxy. Verify and

eventually adjust the alignments and let the epoxy cure.

Glue all the 5x5 mm sticks between the three CF rings. Verify and eventually adjust

the alignments and let the epoxy cure.

Helpful hint: The length of the cowl should your motor length and/or its position to

Wrap the cowl with 2mm balsa sheet. Glue with 30' epoxy.

Sand the concentric rings on the outside to have a smooth & curved cowl noose

Wait until the motor is installed before adjusting & fixing the cowl on the fuse

allow plane balancing

DRAFT