- ページ 10

防犯カメラ HIKVISION H1T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION H1T Series 14 ページ。 Turbo hd dome camera
HIKVISION H1T Series にも：ユーザーマニュアル (15 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (14 ページ)

2. Install the bracket to the wall by aligning the four

screw holes of the bracket with expansion screws on

the wall.

3. Secure the bracket with four hex nuts and washers.

Figure 2-17 Install the Pendent Bracket

4. Install the mounting base of the turret camera to

the wall mounting bracket and secure them with

supplied screws.

Type I Camera

Figure 2-18 Install the Mounting Base to the Pendent

5. Route the cables through the bracket.

6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to complete the installation.

3 Menu Description

Purpose:

Call the menu by clicking button

or call preset No.95.

Steps:

1. Connect the camera with the TVI DVR, and the

monitor shown as the Figure 3-1.

2. Power on the analog camera, TVI DVR, and the

monitor to view the image on the monitor.

3. Click PTZ Control to enter the PTZ Control interface.

4. Call the camera menu by clicking

preset No. 95.

5. Click the direction arrow to control the camera.

(1) Click up/down direction button to select the

item.

(2) Click Iris + to confirm the selection.

(3) Click left/right direction button to adjust the

value of the selected item.

Bracket

Figure 3-1 Connection

on the PTZ interface,

button, or call