- ページ 9

防犯カメラ HIKVISION H1T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION H1T Series 14 ページ。 Turbo hd dome camera
HIKVISION H1T Series にも：ユーザーマニュアル (15 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (14 ページ)

ページを印刷する

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

Tilt Position Range

[0°to75°]

2.3 Installation of Type I and Type II Camera

2.3.1 Ceiling/Wall Mounting with JunctionBox

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole (optional) in the

ceiling/wall according to the holes of the drill

template.

Note:

Drill the cable hole, when adopting the ceiling outlet to

route the cable.

Type I Camera

Figure 2-15 Drill Template of the Junction Box

3. Take apart the junction box, and align the screw

holes of the turret camera's mounting base with

those on junction box' cover.

4. Fix the mounting base on junction box's cover by

supplied screws.

5. Secure the junction box's body with supplied screws

on the ceiling/wall.

6. Combine the junction box's cover with the junction

box's body.

Junction Box Body

7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to install the camera to the

junction box.

2.3.2 Wall Mounting with Pendant Bracket

Note:

You need to purchase a pendant bracket separately if

you adopt wall mounting with a pendant bracket.

Steps:

Drill four screw holes in the wall according to the

holes of the bracket.

Figure 2-14 3-axis Adjustment

Screw

Hole

Cable

Hole

Figure 2-16 Fix the Gang Box

Pan Position Range

[0° to 360°]

Rotation Position Range

[0° to 360°]

Type II Camera

Junction Box Body

Junction Box Cover