- ページ 5
自転車 Bernds folding bikeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bernds folding bike 9 ページ。
ページを印刷する4.
Folding in the seatpost:
Loosen the quick-release lever on
the seatpost, pull the seat tube upwards and out of the frame
until you can feel the end stop and lay it on the left next to
the frame tube. Fix the saddle and handlebars with the lashing
strap by attaching the hook on the strap to a wheel spoke.
The next step reduces the size when folded even further:
Optionally:
to remove the front wheel:
•
mediately above the front forks with a 6 mm Allen key and pull
the front wheel complete with forks downwards and out of the
tube.
Caution:
The forks are still connected to the handlebars
via the Bowden cable belonging to the front brake and possibly
via the electric wire from the hub dynamo. Take care when
unfolding that the forks are pushed completely into the head
tube as far as the end stop and that subsequently the clip is
closed hand tight!
Bernds-Folding Bike
Unfolding your
sing the sequence.
Loosen the clip im-
is done by rever-
Important notes on safety!
•
The handlebar stem and the upper seatpost should never
be pulled out further than the safety mark which shows
the maximum extension.
•
The lower seatpost must be pushed right down while riding!
•
Mounting sprung saddles or seatposts is not permitted!
•
The maximum payload including the rider is 140kg.
•
Your BERNDS
-Folding Bike is suitable for riders between
1.40 and 2.10m tall. If your height or weight exceed the
stated maximum, please get in touch with us.
•
Carry luggage only in the bags and baskets intended for
the purpose which are correctly fastened and only up to
their stated maximum weight. Our accessory range inclu-
des a wide selection of individual solutions.
•
Children may only be transported on an approved and
correctly mounted child seat.
•
Follow the applicable national regulations! In Germany
BERNDS -Folding Bike only complies with the traffic regu-
lations when provided with an approved lighting system
which is available as an accessory.
•
Manipulating the forks and frame, such as engraving
registration numbers, may lead to fracturing the frame
and is not permitted.