- ページ 6

自転車 Bernds folding bikeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bernds folding bike 9 ページ。

Maintenance and inspection

first 200

km, your

After roughly the

have its first inspection made by a bicycle mechanic, during which

the following points in particular should be observed:

•

The spokes on the road wheels settle into place; for this reason

they should be checked and the wheels centred again if necessary.

•

We build in high-quality bolts and fixings. Neverthless, all bolts

should be checked to see they are sitting firm.

•

Bowden cables tend to stretch so gears and brake settings

should be checked.

We should point out that many components on a bicycle are sub-

ject to wear and tear and so must be regularly serviced or replaced.

These include tyres, brake pads, brake cables, chainwheels and spro-

ckets, wheel rims, handgrips, the saddle, the bearings on wheels and

the bottom bracket. Depending on use, these parts must be serviced

at regular intervals and replaced when they reach their individual

limit of wear.

Consequently, BERNDS recommends making a regular inspec-

tion every 2 000 km, and at least once a year.

BERNDS-Folding Bike

should

•

Make sure that the folding seatpost is lubricated and free of

dirt. It must be easy to pull out and push in again.

•

Frame and attachments: Remove dirt with a soft, damp cloth.

Do not use detergents containing solvents or abrasive cleaning

products such as scouring powder or steel wool.

•

Take care of the chain by cleaning it regularly with a commer-

cial cleaning product and then apply chain lubricant.

•

Do not use a high-pressure cleaner under any circumstances!