- ページ 6

自動車バッテリー充電器 Green motion SMART ONEのPDF 技術文書マニュアルをオンラインで閲覧またはダウンロードできます。Green motion SMART ONE 12 ページ。

SMART ONE – TECHNICAL DOCUMENTATION

Page 6

2.3

Connection to the LAN network

The network cable is introduced below the SMART ONE and it should be connected onto the RJ45

socket, which is located on the electronics board. For edgewise connection there's an optional adapter

available. If it used, ensure that the adaptor is not touching live parts on the electronics board.

There are two possible means of internet connection, by UMTS 3G or by RJ45 cable.

For UTMS 3G/4G connection, the modem is installed by Green Motion when ordering the charging

station. 3G/4G network coverage must be checked before installation of the SMART ONE is carried out.

Green Motion does not recommend using the 3G/4G network in an underground car parking or in areas

that have poor mobile network services.

Green Motion can also install a fiber optic SC port to ethernet RJ45 converter (multimode type or single

mode type). (Quote on demand).

The charging station and the payment system are configured in DHCP. It is not possible to assign fixed IP

addresses to the equipment. If it is essential to use a fixed IP address, Green Motion can install an

additional router in the charging station.

Green Motion charging stations communicate to the Green Motion server IP address 108.129.36.195 on

the TCP 83 port number.

Incoming data (NAT/PAT) is not necessary.