Green motion SMART ONE 기술 문서 매뉴얼 - 페이지 6
{카테고리_이름} Green motion SMART ONE에 대한 기술 문서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green motion SMART ONE 12 페이지.
페이지 인쇄SMART ONE – TECHNICAL DOCUMENTATION
Page 6
2.3
Connection to the LAN network
The network cable is introduced below the SMART ONE and it should be connected onto the RJ45
socket, which is located on the electronics board. For edgewise connection there's an optional adapter
available. If it used, ensure that the adaptor is not touching live parts on the electronics board.
There are two possible means of internet connection, by UMTS 3G or by RJ45 cable.
For UTMS 3G/4G connection, the modem is installed by Green Motion when ordering the charging
station. 3G/4G network coverage must be checked before installation of the SMART ONE is carried out.
Green Motion does not recommend using the 3G/4G network in an underground car parking or in areas
that have poor mobile network services.
Green Motion can also install a fiber optic SC port to ethernet RJ45 converter (multimode type or single
mode type). (Quote on demand).
The charging station and the payment system are configured in DHCP. It is not possible to assign fixed IP
addresses to the equipment. If it is essential to use a fixed IP address, Green Motion can install an
additional router in the charging station.
Green Motion charging stations communicate to the Green Motion server IP address 108.129.36.195 on
the TCP 83 port number.
Incoming data (NAT/PAT) is not necessary.