- ページ 11
防犯カメラ HIKVISION Turbo HD D8T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION Turbo HD D8T Series 17 ページ。 Bullet camera &turret camera
HIKVISION Turbo HD D8T Series にも： ユーザーマニュアル (17 ページ)
ページを印刷する
7. Connect the corresponding cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Loosen the pan adjusting screw to adjust the
pan position [0° to 340°].
3). Loosen the rotation adjusting screw to adjust
the rotation position [0° to 355°].
9. Install the bubble back to the camera.
Figure 2-19 Install the Bubble Back
10. Finish the installation.
Figure 2-17 Secure the camera
Pan Position
0° to 340°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-18 3-Axis Adjustment
Figure 2-20 Finish the Installation