HIKVISION Turbo HD D8T Series Kullanıcı Kılavuzu - Sayfa 11
Güvenlik Kamerası HIKVISION Turbo HD D8T Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION Turbo HD D8T Series 17 sayfaları. Bullet camera &turret camera
Ayrıca HIKVISION Turbo HD D8T Series için: Kullanıcı Kılavuzu (17 sayfalar)
Sayfayı Yazdır
7. Connect the corresponding cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Loosen the pan adjusting screw to adjust the
pan position [0° to 340°].
3). Loosen the rotation adjusting screw to adjust
the rotation position [0° to 355°].
9. Install the bubble back to the camera.
Figure 2-19 Install the Bubble Back
10. Finish the installation.
Figure 2-17 Secure the camera
Pan Position
0° to 340°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-18 3-Axis Adjustment
Figure 2-20 Finish the Installation