- ページ 5

防犯カメラ HIKVISION TURBO HD DS-2CE56C5T-IT3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56C5T-IT3 16 ページ。 Dome & turret camera

2 Installation

Before you start:

Make sure that the device in the package is in good



condition and all the assembly parts are included.

Make sure that all the related equipment is power-off



during the installation.

Check the specification of the products for the



installation environment.

Check whether the power supply is matched with



your required output to avoid damage.

Make sure the wall is strong enough to withstand



three times the weight of the camera and the

mounting.

If the wall is cement, insert expansion screws before



installing the camera. If the wall is wooden, use

self-tapping screw to secure the camera.

If the product does not function properly, contact



your dealer or the nearest service center. Do NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Ceiling Mounting of Type I Camera

Before you start:

The installation steps of ceiling mounting and wall

mounting are similar, and the following takes ceiling

mounting as an example to describe the steps.

Steps:

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Disassemble the camera to remove the bubble.

4. Attach the back box of camera to the ceiling and

secure them with supplied screws.

Figure 2-1 Drill Template

Figure 2-2 Remove the Bubble