- ページ 6

防犯カメラ HIKVISION TURBO HD DS-2CE56C5T-IT3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56C5T-IT3 16 ページ。 Dome & turret camera

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

8. Adjust the tilt position [0° to 75°], the pan position

[0° to 355°], the rotation position [0° to 355°].

9. Install the bubble back to the camera.

10. Tighten screws on the bubble to finish the

installation.

Figure 2-3 Attach the Back Box

Figure 2-4 3-Axis Adjustment

Figure 2-5 Install the Bubble Back

Figure 2-6 Finish the Installation