- ページ 7
防犯カメラ HIKVISION TURBO HD DS-2CE56D8T-IT3ZFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56D8T-IT3ZF 17 ページ。 Bullet camera &turret camera
ページを印刷する
5. Attach the junction box's body to the ceiling/wall by
aligning the screw holes of the junction box.
6. Secure the junction box's body with supplied screws
on the ceiling/wall.
Figure 2-6 Secure the Box's Body to the Ceiling
7. Route the cables through the cable hole, or the side
opening of the junction box.
8. Combine the junction box cover with its body.
Figure 2-7 Install the Junction Box Cover back to its
9. Refer to step 5 to 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The installation steps of ceiling mounting and wall
mounting are similar and the following takes ceiling
mounting as an example to describe the steps.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
Body
Figure 2-8 Drill Template