HIKVISION TURBO HD DS-2CE56D8T-IT3ZF 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION TURBO HD DS-2CE56D8T-IT3ZF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56D8T-IT3ZF 17 페이지. Bullet camera &turret camera
페이지 인쇄
5. Attach the junction box's body to the ceiling/wall by
aligning the screw holes of the junction box.
6. Secure the junction box's body with supplied screws
on the ceiling/wall.
Figure 2-6 Secure the Box's Body to the Ceiling
7. Route the cables through the cable hole, or the side
opening of the junction box.
8. Combine the junction box cover with its body.
Figure 2-7 Install the Junction Box Cover back to its
9. Refer to step 5 to 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The installation steps of ceiling mounting and wall
mounting are similar and the following takes ceiling
mounting as an example to describe the steps.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
Body
Figure 2-8 Drill Template