- ページ 7

防犯カメラ HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZE 17 ページ。

3. Loosen the screws on the bubble of the dome

camera to remove the bubble and the black liner.

4. Attach the back box of type I camera/base plate of

type II camera to the ceiling and secure them with

supplied screws.

Type I Camera

Figure 2-2 Attach the Back Box/Base Plate

Note:

In the supplied screw package, both self-tapping



screws and expansion bolts are contained.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Align the camera with the back box/base plate, and

tighten the screws to secure the camera with the

back box/base plate.

Type I Camera

Figure 2-3 Fix the camera to the Ceiling

7. Connect the corresponding cables, such as power

cable and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Type I Camera

0° to 75°

9. Fit the black liner back to the camera and tighten

the screws on the bubble of the dome camera to

finish the installation.

0° to 355°

Figure 2-4 3-Axis Adjustment

Type II Camera

0° to75°

0° to355°

0° to 340°