- ページ 8
防犯カメラ HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZE 17 ページ。
ページを印刷する
2.1.2 Wall Mounting
Before you start:
You need to purchase a wall mounting bracket
separately.
Steps:
1. Drill 4 screw holes in the wall according to the holes
of the bracket.
2. Attach the bracket to the wall by aligning the 4
screw holes of the bracket with expansion screws on
the wall.
3. Secure the bracket with 4 hex nuts and washers.
Figure 2-5 Install Wall Mounting Bracket
4. Refer to step 3 of 2.1 Installation of
Camera
5.
Ceiling Mounting
and the black liner.
6. Attach the back box/base plate of the dome camera
to the wall mounting bracket and secure them with
supplied screws.
Type I Camera
Figure 2-6 Attach the Base Plate to the Bracket
7. Route the cables through the bracket.
8.
steps 6 to 9 of the 2.1 Installation of
Repeat
Type II Camera
9.
Ceiling Mounting
2.1.3 In-Ceiling Mounting
Before you start:
You need to purchase an in-ceiling mounting bracket
separately.
Steps:
1. Attach the drill template on the ceiling.
2. Drill the screw holes and cable holes (optional) in
the ceiling according to the supplied drill template.
Note:
Drill the cable hole when adopting the ceiling outlet
to route the cable.
Type I Camera
to remove dome camera's bubble
to complete the installation.
Type II Camera
Type I and Type II
Type I and