- ページ 5
電気ヒーター decorflame QC810のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。decorflame QC810 6 ページ。 Electric stove heater
ページを印刷するREMOTE CONTROL bATTERY
REPLACEMENT
Replace with 2 AAA batteries WARNINg: Do
not mix old and new batteries. Do not mix
alkaline, standard (Carbon-Zinc), or recharge-
able (Nickel Cadmium.
WARNINg: Do not dispose of batteries in fire.
batteries may explode or leak
MAINTENANCE
WARNINg:
Disconnect power and
unplug the power cord before attempting any
maintenance or cleaning to reduce the risk of
fire, electric shock or damage to persons. The
bulbs in your unit can become extremely hot.
Allow at least 10 minutes between turning off
the unit and removing the light bulbs to avoid
the accidental burning of the skin.
RISk OF FIRE:
Do not exceed the
recommended bulb wattage.
CLEANINg
To clean unit, turn controls to off position and
unplug the unit from power source.
To clean glass display panel; remove dust
with clean dry cloth, to remove finger prints
and other marks clean glass with clean damp
cloth. Do not use abrasive cleaners or spray
liquids on glass display panel surface. Metal
and metal painted parts should be cleaned
with damp cloth. Do not use abrasive cleaners
or spray liquids on these surfaces.
M A I N T E N A N C E
REPLACINg THE
LIgHT bULbS
Step 1: Open the door.
Step 2: Loosen the 2 screws at the front of
the log set inside the fireplace. Carefully
lift the log set up far enough to access the
light bulbs. You will find 2 x 40W Type b-10,
candelabra light bulb with E-12 socket base
at the bottom.
Step 3: Replace the burnt out bulb using new
40W type b-10 candelabra light bulb.
Step 4: Reinstall the log set.
Step 5: Plug in the unit.
Picture may vary from actual product.
5