decorflame QC810 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електричний обігрівач decorflame QC810. decorflame QC810 6 сторінок. Electric stove heater

Друкувати сторінку

REMOTE CONTROL bATTERY

REPLACEMENT

Replace with 2 AAA batteries WARNINg: Do

not mix old and new batteries. Do not mix

alkaline, standard (Carbon-Zinc), or recharge-

able (Nickel Cadmium.

WARNINg: Do not dispose of batteries in fire.

batteries may explode or leak

MAINTENANCE

WARNINg:

Disconnect power and

unplug the power cord before attempting any

maintenance or cleaning to reduce the risk of

fire, electric shock or damage to persons. The

bulbs in your unit can become extremely hot.

Allow at least 10 minutes between turning off

the unit and removing the light bulbs to avoid

the accidental burning of the skin.

RISk OF FIRE:

Do not exceed the

recommended bulb wattage.

CLEANINg

To clean unit, turn controls to off position and

unplug the unit from power source.

To clean glass display panel; remove dust

with clean dry cloth, to remove finger prints

and other marks clean glass with clean damp

cloth. Do not use abrasive cleaners or spray

liquids on glass display panel surface. Metal

and metal painted parts should be cleaned

with damp cloth. Do not use abrasive cleaners

or spray liquids on these surfaces.

M A I N T E N A N C E

REPLACINg THE

LIgHT bULbS

Step 1: Open the door.

Step 2: Loosen the 2 screws at the front of

the log set inside the fireplace. Carefully

lift the log set up far enough to access the

light bulbs. You will find 2 x 40W Type b-10,

candelabra light bulb with E-12 socket base

at the bottom.

Step 3: Replace the burnt out bulb using new

40W type b-10 candelabra light bulb.

Step 4: Reinstall the log set.

Step 5: Plug in the unit.

Picture may vary from actual product.