- ページ 12
食器洗い機 IKEA HYGIENISKのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA HYGIENISK 32 ページ。
IKEA HYGIENISK にも： マニュアル (32 ページ), マニュアル (28 ページ), マニュアル (29 ページ), マニュアル (28 ページ)
ページを印刷する
ENGLISH
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
In your request, include the product number
code (PNC) from the rating plate.
Basic settings
You can configure the appliance by changing
basic settings according to your needs.
Number
Setting
1
Rinse aid empty
notification
2
End sound
3
Auto door open
4
Key tones
5
Latest pro‐
gramme selec‐
tion
6
Display on floor
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to configure the
appliance are provided further in this
chapter.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
Values
1d (on)
Activate or deactivate the rinse aid indica‐
0d (off)
tor.
Factory setting: 1d.
1b (on)
Activate or deactivate the acoustic signal for
0b (off)
the end of a programme.
Factory setting: 0b.
1o (on)
Activate or deactivate the AutoOpen.
0o (off)
Factory setting: 1o.
1F (on)
Activate or deactivate the sound of the but‐
0F (off)
tons when pressed.
Factory setting: 1F.
1H (on)
Enable or disable the automatic selection of
0H (off)
the most recently used programme and op‐
tions.
Factory setting: 0H.
1C (on)
Activate or deactivate the TimeBeam.
0C (off)
Factory setting: 1C.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Description
The order of the basic settings presented in
the table is also the order of the settings in
setting mode.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the hot rinse phase.
12
1)