IKEA HYGIENISK 매뉴얼 - 페이지 12
{카테고리_이름} IKEA HYGIENISK에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA HYGIENISK 32 페이지.
IKEA HYGIENISK에 대해서도 마찬가지입니다: 매뉴얼 (32 페이지), 매뉴얼 (28 페이지), 매뉴얼 (29 페이지), 매뉴얼 (28 페이지)
페이지 인쇄
ENGLISH
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
In your request, include the product number
code (PNC) from the rating plate.
Basic settings
You can configure the appliance by changing
basic settings according to your needs.
Number
Setting
1
Rinse aid empty
notification
2
End sound
3
Auto door open
4
Key tones
5
Latest pro‐
gramme selec‐
tion
6
Display on floor
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to configure the
appliance are provided further in this
chapter.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
Values
1d (on)
Activate or deactivate the rinse aid indica‐
0d (off)
tor.
Factory setting: 1d.
1b (on)
Activate or deactivate the acoustic signal for
0b (off)
the end of a programme.
Factory setting: 0b.
1o (on)
Activate or deactivate the AutoOpen.
0o (off)
Factory setting: 1o.
1F (on)
Activate or deactivate the sound of the but‐
0F (off)
tons when pressed.
Factory setting: 1F.
1H (on)
Enable or disable the automatic selection of
0H (off)
the most recently used programme and op‐
tions.
Factory setting: 0H.
1C (on)
Activate or deactivate the TimeBeam.
0C (off)
Factory setting: 1C.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Description
The order of the basic settings presented in
the table is also the order of the settings in
setting mode.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the hot rinse phase.
12
1)