IKEA HYGIENISK 매뉴얼 - 페이지 14

{카테고리_이름} IKEA HYGIENISK에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA HYGIENISK 32 페이지.
IKEA HYGIENISK에 대해서도 마찬가지입니다: 매뉴얼 (32 페이지), 매뉴얼 (28 페이지), 매뉴얼 (29 페이지), 매뉴얼 (28 페이지)

페이지 인쇄

1. Control Panel

ENGLISH

• DELAY and the countdown duration when

the delay start begins.

• An alarm code when the appliance has a

malfunction.

When AutoOpen opens the door,

TimeBeam is off. To check the

remaining time of the running

programme, look at the control

panel display.

Setting mode

How to enter setting mode

You can enter setting mode before starting a

programme. You cannot enter setting mode

while the programme is running.

To enter setting mode, press and hold

simultaneously

seconds.

• The lights related to

are on.

• The display shows the current value

of the first available setting.

How to navigate in setting mode

You can navigate in setting mode using

programme buttons.

Before first use

1. Fill the rinse aid dispenser.

2. Open the water tap.

3. Start the Quick 30' programme to

remove any residuals from the

manufacturing process. Do not use

and

for about 3

and

A. Previous button

B. OK button

C. Next button

Use Previous and Next to switch between

the basic settings and to change their value.

Use OK to enter the selected setting and to

confirm changing its value.

How to change a setting

Make sure the appliance is in setting mode.

1. Use Previous or Next to select the

desired setting.

The display shows the current setting value

(a digit and the dedicated letter).

2. Press OK to enter the setting.

The current setting value flashes.

3. Press Previous or Next to change the

value.

4. Press OK to confirm the setting.

• The new setting is saved.

• The appliance returns to the basic

settings list.

5. Press and hold simultaneously

for about 3 seconds to exit setting

mode.

The appliance returns to the programme

selection.

The saved settings remain valid until you

change them again.

detergent and do not put dishes in the

baskets.

and