- ページ 8
エンジン GAPOSA QC400のPDF マニュアルをオンラインで閲覧またはダウンロードできます。GAPOSA QC400 16 ページ。 Automatic control unit for three/single-phase motors with digital or mechanical limits
ページを印刷する
4 CONNECT QC400 TO MECHANICAL LIMIT SWITCH MOTOR
ATTENTION: if you connect a control unit already pre-set for mechanical limits to a motor with encoder limits, the motor
won't work correctly. In particular, the motor will not find the limit positions and this could put at risk the safety of peo-
ple and/or things.
In order to connect the QC400 with a motor with mechanical limits set the DIP10 on S3 in OFF (See 4.1 PROGRAMMING).
1 GREY
> OPEN LIMIT SWITCH
2 GREEN
> OPEN BUTTON (Micro on motor limit switch)
3 WHITE
> SAFETY
4 YELLOW
> CLOSE BUTTON (Micro on motor limit switch)
5 PINK
> CLOSE LIMIT SWITCH
6 BROWN
> SAFETY
8
4 5 6
1 2 3
FLCE31W012
X7
12 11 10 9 8 7 6 5 4 3 2 1
X5
X6
1
2
3
4
5
6
7
8
9
10
11
12
ATTENTION!
!
13
Never bridge
the 14-15 terminals
14
because safeties
will be disable
15
ATTENTION!
!
In case of mechanical
limits terminals 2 and 5
of the X6 must
be jumped