- ページ 6

ラボラトリー機器 CORNING 6780-NPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CORNING 6780-NP 10 ページ。 Digital microplate and orbital shakers
CORNING 6780-NP にも： 取扱説明書 (13 ページ)

ページを印刷する
CORNING 6780-NP 取扱説明書

5.2 Basic Operation

Power
Press the POWER switch on the control panel. The shaker automatically detects supply frequency of 50 or 60Hz, and displays F50 or

F60. Then the display switches to show the set TIME and illuminates the TIME light.
Power
TIME signal light is on. By rotating the encoder knob right (+) or left (-) the set time can be selected from 30 seconds to 99 minutes

50 seconds:
99.5 = 99 minutes 50 seconds
•
9.59 = 9 minutes 59 seconds
•
0.30 = 30 seconds
•
Power
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You can reach the HLd function by setting to

under 0.30 or above 99.5.
Push the encoder knob to switch modes between TIME set mode and RPM set mode.

4
|
CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Start
Stop
Start
Stop
Start
Stop