CORNING 6780-NP Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CORNING 6780-NP. CORNING 6780-NP 10 pagina's. Digital microplate and orbital shakers
Ook voor CORNING 6780-NP: Gebruiksaanwijzing (13 pagina's)
Pagina afdrukken
5.2 Basic Operation
Power
Press the POWER switch on the control panel. The shaker automatically detects supply frequency of 50 or 60Hz, and displays F50 or
F60. Then the display switches to show the set TIME and illuminates the TIME light.
Power
TIME signal light is on. By rotating the encoder knob right (+) or left (-) the set time can be selected from 30 seconds to 99 minutes
50 seconds:
99.5 = 99 minutes 50 seconds
•
9.59 = 9 minutes 59 seconds
•
0.30 = 30 seconds
•
Power
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You can reach the HLd function by setting to
under 0.30 or above 99.5.
Push the encoder knob to switch modes between TIME set mode and RPM set mode.
4
|
CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Start
Stop
Start
Stop
Start
Stop