- ページ 8
電動工具 Makita 3620のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 3620 13 ページ。 Router
Makita 3620 にも： 取扱説明書 (20 ページ), 取扱説明書 (17 ページ), 取扱説明書 (17 ページ), 取扱説明書 (18 ページ)
ページを印刷する
1
3
2
1. Straight guide
2. Guide bar
3. Wing bolt
A
1
1. Screw
2. Base plate
3. Templet guide
8
Straight guide
003259
The straight guide is effectively used for straight cuts when chamfering or
grooving.
To install the straight guide, insert the guide bars into the holes in the tool
003260
base. Adjust the distance between the bit and the straight guide. At the desired
distance, tighten the wing bolts to secure the straight guide in place.
When cutting, move the tool with the straight guide flush with the side of the
workpiece.
If the distance (A) between the side of the workpiece and the cutting position is
003261
too wide for the straight guide, or if the side of the workpiece is not straight, the
straight guide cannot be used. In this case, firmly clamp a straight board to the
workpiece and use it as a guide against the router base. Feed the tool in the
direction of the arrow.
Templet guide (Accessory)
003262
The templet guide provides a sleeve through which the bit passes, allowing
use of the tool with templet patterns.
To install the templet guide, loosen the screws on the tool base, insert the tem-
003263
plet guide and then tighten the screws.
2
3