- ページ 12

電動工具 Makita 3901のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 3901 16 ページ。 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 3901 にも：パンフレット (1 ページ), 取扱説明書 (12 ページ), 取扱説明書 (17 ページ)

ページを印刷する

CAUTl

ON:

Before trimming the panels, check the wall or ceiling carefully to avoid cutting the electrical

wires, nails or other foreign materials.

*Always reinstall the rubber facing after trimming the panels. If cutting slots for biscuits

without the rubber facing installed properly on the tool, the tool might slip unexpectedly

on the workpiece, causing dangerous loss of control of the tool. When installing the rubber

facing, always hook

onto the inside of the front opening.

Removing or installing the blade

CAUTION:

Always be sure that the tool is switched off and unplugged before removing or installing

the blade.

To remove the blade, loosen the clamp screw

and open the blade cover. Push the shaft lock

and loosen the lock nut using the lock nut

wrench.

To install the blade, first mount the inner

flange.

CAUTION:

When installing the cutter blade, mount the

inner flange with the side marked "22"

facing toward you.

When installing the circular saw blade,

mount the inner flange with the side

marked "22" facing toward the tool.

Lock

nut

- @

Cutter blade

Inner flange

Blade coyer

Then mount the blade and the lock nut. Securely tighten the lock nut using the lock nut

wrench. Close the blade cover and tighten the clamp screw to secure the blade cover.

CAUTl ON:

*Use only the Makita lock nut wrench provided to remove or install the blade.

*Always check the depth of cut after replacing the blade. Readjust it if necessary.