- ページ 9
電動工具 Makita 4350FCTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 4350FCT 13 ページ。 Jig saw
Makita 4350FCT にも： 仕様 (2 ページ), 部品内訳 (3 ページ), 取扱説明書 (13 ページ), 取扱説明書 (13 ページ), 技術情報 (14 ページ)
ページを印刷する
Dust extraction
► 1 . Dust nozzle 2. Base
The dust nozzle (accessory) is recommended to per-
form clean cutting operations.
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right
side of the base.
Then connect a Makita vacuum cleaner to the dust
nozzle.
1
► 1 . Dust nozzle 2. Hose for vacuum cleaner
CAUTION:
•
If you try to remove the dust nozzle forcibly, the
hook of the dust nozzle can be diminished and
removed unintentionally during operation.
1
2
2
Rip fence set (optional accessory)
CAUTION:
•
Always be sure that the tool is switched off
and unplugged before installing or removing
accessories.
1. Straight cuts
► 1 . Rip fence
1
2
3
► 1 . Hex wrench 2. Bolt 3. Fence guide
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts. To
install, insert the rip fence into the rectangular hole on
the side of the tool base with the fence guide facing
down. Slide the rip fence to the desired cutting width
position, then tighten the bolt to secure it.
2. Circular cuts
9 ENGLISH
1