Makita 4350FCT Kullanım Kılavuzu - Sayfa 9

Elektrikli Alet Makita 4350FCT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4350FCT 13 sayfaları. Jig saw
Ayrıca Makita 4350FCT için: Teknik Özellikler (2 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (13 sayfalar), Teknik Bilgiler (14 sayfalar)

Dust extraction

► 1 . Dust nozzle 2. Base

The dust nozzle (accessory) is recommended to per-

form clean cutting operations.

To attach the dust nozzle on the tool, insert the hook of

dust nozzle into the hole in the base.

The dust nozzle can be installed on either left or right

side of the base.

Then connect a Makita vacuum cleaner to the dust

nozzle.

► 1 . Dust nozzle 2. Hose for vacuum cleaner

CAUTION:

•

If you try to remove the dust nozzle forcibly, the

hook of the dust nozzle can be diminished and

removed unintentionally during operation.

Rip fence set (optional accessory)

CAUTION:

•

Always be sure that the tool is switched off

and unplugged before installing or removing

accessories.

► 1 . Rip fence

► 1 . Hex wrench 2. Bolt 3. Fence guide

When repeatedly cutting widths of 160 mm or less, use

of the rip fence will assure fast, clean, straight cuts. To

install, insert the rip fence into the rectangular hole on

the side of the tool base with the fence guide facing

down. Slide the rip fence to the desired cutting width

position, then tighten the bolt to secure it.

2. Circular cuts

9 ENGLISH