- ページ 7
電動工具 Makita 6911HDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6911HD 17 ページ。 Cordless impact wrench
Makita 6911HD にも： 取扱説明書 (11 ページ), 取扱説明書 (10 ページ), 取扱説明書 (16 ページ)
ページを印刷する
FUNCTIONAL
DESCRIPTION
1
2
1. Set plate
2. Battery cartridge
1
2
1. Battery cartridge
2. Charging light
3. Battery charger
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
002302
•
Always switch off the tool before insertion or removal of
the battery cartridge.
•
To remove the battery cartridge, pull out the set plate on
the tool and grasp both sides of the cartridge while
withdrawing it from the tool.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Snap the set plate back into place. Be sure
to close the set plate fully before using the tool to prevent
the battery cartridge from accidentally falling out of the
tool.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Charging
004545
1. Plug the battery charger into the proper AC voltage
source. The charging light will flash in green color.
3
2. Insert the battery cartridge so that the plus and minus
terminals on the battery cartridge are on the same sides
as their respective markings on the charger. Insert the
cartridge fully into the port so that it rests on the charger
port floor.
3. When the battery cartridge is inserted, the charging light
color will change from green to red and charging will
begin. The charging light will remain lit steadily during
charging.
4. When the charging light color changes from red to
green, the charging cycle is complete.
5. If you leave the battery cartridge in the charger after the
charging cycle is complete, the charger will switch into
its "trickle charge (maintenance charge)" mode.
6. After charging, unplug the charger from the power
source.
7