- ページ 4

バスルーム設備 BERNSTEIN NT3311のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。BERNSTEIN NT3311 12 ページ。 Freestanding tap

2. Recommended installation

4. Connect hot and cold water pipe

Open the housing cover and

make sure that no water

escapes. After the pipes

are fully connected, apply a

water pressure of 0.5 - 1.2

MPa to both ends of the cold

and hot water pipes. Check

the connections carefully.

There should be no water

leaks in the piping, the test

time should not be less than

5 minutes.

8. Dispose of installation cap

3. Position

43 - 63mm

5. Spirit level

If the bubble is exactly in

the middle between the two

scale marks, the object is

optimally aligned.

43 - 63mm

7. Tiling

After the installation test, tile

the pipes according to the

instructions.

Tile installation Cut sizes:

Ø 102mm

9. Flush pipes

Use the S10 hexagonal key.

Remove the plugs and flush out any impurities.

Ø 102mm