BERNSTEIN NT3311 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} BERNSTEIN NT3311에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BERNSTEIN NT3311 12 페이지. Freestanding tap

2. Recommended installation

4. Connect hot and cold water pipe

Open the housing cover and

make sure that no water

escapes. After the pipes

are fully connected, apply a

water pressure of 0.5 - 1.2

MPa to both ends of the cold

and hot water pipes. Check

the connections carefully.

There should be no water

leaks in the piping, the test

time should not be less than

5 minutes.

8. Dispose of installation cap

3. Position

43 - 63mm

5. Spirit level

If the bubble is exactly in

the middle between the two

scale marks, the object is

optimally aligned.

43 - 63mm

7. Tiling

After the installation test, tile

the pipes according to the

instructions.

Tile installation Cut sizes:

Ø 102mm

9. Flush pipes

Use the S10 hexagonal key.

Remove the plugs and flush out any impurities.

Ø 102mm