- ページ 12

配管製品 BERNSTEIN G30013AのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。BERNSTEIN G30013A 16 ページ。 Support frame

ページを印刷する
BERNSTEIN G30013A 組立説明書
Bidet fixing holes
Back of bidet
Measure the distance 'X' between the centres of the bidet
fixing holes. Insert the bidet fixing bolts into the holes in the
bidet support bar that match the bidet fixing holes.
The fixing bolts can be adjusted (in or out) using a large
screwdriver.
Carefully lift and position the bidet onto the bidet fixing bolts.
Loosen the bidet support bar bolts and set the bar to the
required height. Loosen the connection height adjustment
bolts, set the connection support bar to the required height to
line up with the waste outlet elbow. Retighten the bolts and
remove the bidet.
4
SUPPORT FRAME G30013A
Attach the trap, pop-up waste, waste pipe and mixer/tap, to
the bidet.
Prepare and connect the waste water outlet (a push-fit waste
is recommended).
Note: The waste outlet elbow can be rotated to take the
waste water pipework by loosening the bolts shown. Secure
the pipework in the void.