BERNSTEIN G30013A 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} BERNSTEIN G30013A에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BERNSTEIN G30013A 16 페이지. Support frame

Bidet fixing holes

Back of bidet

Measure the distance 'X' between the centres of the bidet

fixing holes. Insert the bidet fixing bolts into the holes in the

bidet support bar that match the bidet fixing holes.

The fixing bolts can be adjusted (in or out) using a large

screwdriver.

Carefully lift and position the bidet onto the bidet fixing bolts.

Loosen the bidet support bar bolts and set the bar to the

required height. Loosen the connection height adjustment

bolts, set the connection support bar to the required height to

line up with the waste outlet elbow. Retighten the bolts and

remove the bidet.

SUPPORT FRAME G30013A

Attach the trap, pop-up waste, waste pipe and mixer/tap, to

the bidet.

Prepare and connect the waste water outlet (a push-fit waste

is recommended).

Note: The waste outlet elbow can be rotated to take the

waste water pipework by loosening the bolts shown. Secure

the pipework in the void.